ADB-460 Platform tabo waldi inji
Aika mana imel
Gabatarwar Samfur
Gabatarwar Samfur
-
yadda ya kamata kashe walda spatter
Ci gaba da samar da zafi da ake samu ta hanyar fitar da lebur na halin yanzu na IF tabo walda yana sa zafin nut ɗin ya tashi ci gaba.A lokaci guda, madaidaicin iko na hawan gangara na yanzu da lokaci ba zai haifar da ɓarna ba saboda tsalle-tsalle na zafi da lokacin tashi na yanzu wanda ba a iya sarrafa shi ba.
-
Shortarancin ƙarfi-kan lokaci, ingantaccen yanayin thermal
A IF tabo waldi yana da lebur fitarwa waldi halin yanzu, wanda tabbatar da high dace da kuma ci gaba da samar da walda zafi.Kuma ikon-kan lokaci gajere ne, yana kaiwa matakin ms, wanda ke sa yankin waldawar da zafin ya shafa ƙarami, kuma an kafa haɗin gwiwar solder da kyau.
-
Madaidaicin iko mai girma
Saboda babban mitar aiki (yawanci 1-4KHz) na tsaka-tsakin mitar Inverter tabo walda, daidaiton kulawar amsawa shine sau 20-80 na injin walƙiya ta AC ta gaba da na'urar gyara tabo ta biyu, da kuma ikon fitarwa daidai. daidaito kuma yana da girma sosai.
-
Ajiye makamashi 30%
Ajiye makamashi, adana makamashin walda a kowane batu, da kuma rage sake zagayowar walda, musamman dacewa da walƙiya lokacin farin ciki da ƙarfe mai ƙarfi.
-
Load daidaita kayan aiki
Ana amfani da tabo waldi da goro tsinkaya waldi na high-ƙarfi karfe da zafi kafa karfe a mota masana'antu masana'antu, tabo waldi da Multi-aya tsinkaya waldi na talakawa low-carbon karfe farantin, bakin karfe farantin, aluminum farantin da waya, juriya. brazing da tabo waldi na jan karfe waya a high da low irin ƙarfin lantarki lantarki masana'antu, jan farantin brazing, hada azurfa tabo waldi, da dai sauransu.
Samfuran walda
Samfuran walda
Cikakken Bayani
Cikakken Bayani
Ma'aunin walda
Ma'aunin walda
| Samfura | ADB-5 | ADB-10 | ADB-75T | Saukewa: ADB100T | Saukewa: ADB-100 | Saukewa: ADB-130 | Saukewa: ADB-130Z | Saukewa: ADB-180 | Saukewa: ADB-260 | Saukewa: ADB-360 | Saukewa: ADB-460 | Saukewa: ADB-690 | Saukewa: ADB-920 | |
| Ƙarfin Ƙarfi | KVA | 5 | 10 | 75 | 100 | 100 | 130 | 130 | 180 | 260 | 360 | 460 | 690 | 920 |
| Tushen wutan lantarki | ø/V/HZ | 1/220V/50Hz | 3/380V/50Hz | |||||||||||
| Kebul na farko | mm2 | 2×10 | 2×10 | 3×16 | 3×16 | 3×16 | 3×16 | 3×16 | 3 ×25 | 3 ×25 | 3 ×35 | 3 ×50 | 3 ×75 | 3×90 |
| Max Primary Current | KA | 2 | 4 | 18 | 28 | 28 | 37 | 37 | 48 | 60 | 70 | 80 | 100 | 120 |
| Zagayowar Layi | % | 5 | 5 | 20 | 20 | 20 | 20 | 20 | 20 | 20 | 20 | 20 | 20 | 20 |
| Girman Silinda Welding | Ø*L | Ø25*30 | Ø32*30 | Ø50*40 | Ø80*50 | Ø100*60 | Ø125*100 | Ø160*100 | Ø160*100 | Ø160*100 | Ø200*100 | Ø250*150 | Ø250*150*2 | Ø250*150*2 |
| Matsakaicin Matsayin Aiki (0.5MP) | N | 240 | 400 | 980 | 2500 | 3900 | 6000 | 10000 | 10000 | 10000 | 15000 | 24000 | 47000 | 47000 |
| Amfanin Jirgin Sama | Mpa | 0.6-0.7 | 0.6-0.7 | 0.6-0.7 | 0.6-0.7 | 0.6-0.7 | 0.6-0.7 | 0.6-0.7 | 0.6-0.7 | 0.6-0.7 | 0.6-0.7 | 0.6-0.7 | 0.6-0.7 | 0.6-0.7 |
|
Amfanin Ruwa Mai sanyaya | L/min | - | - | 6 | 6 | 8 | 12 | 12 | 12 | 12 | 15 | 20 | 24 | 30 |
|
Amfanin Jirgin Sama | L/min | 1.23 | 1.43 | 1.43 | 2.0 | 2.28 | 5.84 | 5.84 | 5.84 | 5.84 | 9.24 | 9.24 | 26 | 26 |
Tsarin al'ada
Tsarin al'ada
Abubuwan Nasara
Abubuwan Nasara
Bayan-tallace-tallace System
Bayan-tallace-tallace System
-
20+Shekaru
tawagar sabis
Daidai kuma kwararre -
24hx7
sabis akan layi
Babu damuwa bayan tallace-tallace bayan tallace-tallace -
Kyauta
wadata
horar da fasaha kyauta.
Abokin tarayya
Abokin tarayya
Welder FAQ
Welder FAQ
- Tambaya: Shin na'urorin walda na tabo suna buƙatar preheated?
A: Lantarki baya buƙatar preheating, amma a wasu lokuta, preheating na iya inganta sakamakon walda.
- Tambaya: Wane irin hayaniya za a yi a lokacin aikin walda na tabo?
A: Tsarin walda na injin waldawa ta wuri zai haifar da hayaniya, kuma ana buƙatar matakan kariya kamar toshe kunnuwa.
- Tambaya: Za a iya kiyaye injin waldawa ta wurin da kanku?
A: Wasu ayyukan kulawa za a iya yin su da kanku, amma ƙarin ayyuka masu rikitarwa za su buƙaci ƙwararrun ƙwararrun ƙwararru.
- Tambaya: A ina ake buƙatar shigar da waldar tabo?
A: Ana buƙatar shigar da waldar tabo a cikin wuri mai kyau, busasshen wuri kuma a haɗa shi da layin wutar lantarki.
- Tambaya: Tsawon wane lokaci ake ɗauka don gyara abin walda?
A: Lokacin gyarawa ya dogara da sarƙaƙƙiyar aikin gyarawa da tsananin gazawar kayan aiki, kuma yawanci yana ɗaukar sa'o'i zuwa kwanaki.
- Tambaya: Ta yaya ake buƙatar tsabtace wuraren walda?
A: Dole ne a tsaftace masu walda tabo da iska mai matsewa ko wanka, kuma kada a share su da ruwa ko wasu ruwaye.