page banner

ADB-100T Platform spot welding machine

Short Description:

The ADB-100T intermediate frequency inverter spot welding machine is a three-phase alternating current that is rectified into a pulsating direct current, and then the inverter circuit composed of power switching devices becomes an intermediate frequency square wave connected to the transformer, and after stepping down, it is rectified into a direct current with less pulsation to supply the electrode pair DC resistance welding equipment for welding workpieces. IF inverter welding is one of the most advanced welding methods at now. There are many features of IF spot welding machines.

ADB-100T Platform spot welding machine

Welding Video

Welding Video

Product Introduction

Product Introduction

  • effectively suppress welding spatter and obtain stable and high-quality welding results

    The continuous heat supply generated by the flat output current of the IF welding machine makes the temperature of the nugget rise continuously. At the same time, the precise control of the current rising slope and time will not cause spatter due to heat jumps and uncontrollable current rising time.

  • Short power-on time, high thermal efficiency, beautiful welding shape

    The IF spot welder has a flat output welding current, which ensures the high-efficiency and continuous supply of welding heat. And the power-on time is short, reaching the ms level, which makes the welding heat-affected zone small, and the solder joints are formed beautifully.

  • High control precision

    Due to the high working frequency (usually 1-4KHz) of the Inverter spot welding machine, the feedback control accuracy is 20-80 times that of the general AC spot welding machine and the secondary rectification spot welding machine, and the corresponding output control accuracy is also very high.

  • Energy saving

    Due to high thermal efficiency, small welding transformer and small iron loss, the inverter welding machine can save more than 30% energy than AC spot welding machine and secondary rectification spot welding machine when welding the same workpiece.

  • Inverter welder is suitable for grid power supply balance, without power compensation equipment

    It is used for spot welding and nut projection welding of high-strength steel and hot formed steel in automobile manufacturing industry, spot welding and multi-point projection welding of ordinary low-carbon steel plate, stainless steel plate, galvanized plate, resistance brazing and spot welding of copper wire in high and low voltage electrical industry, silver spot welding, composite silver spot welding, etc.

Welder Details

Welder Details

details_1

Welding Parameters

Welding Parameters

Parameters of IF spot welder

Successful Cases

Successful Cases

case (1)
case (2)
case (3)
case (4)

After-sales System

After-sales System

  • 20+Years

    service team
    Accurate and professional

  • 24hx7

    service online
    No worry after sales after-sales

  • Free

    Supply
    technical training freely.

single_system_1 single_system_2 single_system_3

Partner

Partner

partner (1) partner (2) partner (3) partner (4) partner (5) partner (6) partner (7) partner (8) partner (9) partner (10) partner (11) partner (12) partner (13) partner (14) partner (15) partner (16) partner (17) partner (18) partner (19) partner (20)

Welder FAQ

Welder FAQ

  • Q: What is a spot welder?

    A: A spot welder is a metalworking device used to weld two metal parts together.

  • Q: What is the working principle of spot welding machine?

    A: Spot welders use high heat and pressure to weld two metal parts together to form a strong connection.

  • Q: Spot welders use high heat and pressure to weld two metal parts together to form a strong connection.

    A: The spot welder is suitable for most metal materials, including steel, copper, aluminum, iron, etc.

  • Q: What are the main advantages of a spot welder?

    A: The main advantages of the spot welding machine are fast speed, high efficiency, low cost, and high welding strength.

  • Q: What are the main disadvantages of spot welders?

    A: The main disadvantage of the spot welder is that it is only suitable for the welding of thin metal plates, and cannot be used for large-sized or thick parts.

  • Q: What is the service life of the spot welder?

    A: The service life of a spot welder depends on frequency of use, quality and maintenance. Generally speaking, a good spot welder will last for many years.