ADB-75T Platform spot welding machine
Send email to us
Product Introduction
Product Introduction
-
It can suppress welding spatter and achieve stable and high-quality welding effects
The continuous heating generated by electric current continuously increases the temperature of the molten core. At the same time, accurate control of the current rise slope and time will not cause splashes due to thermal jumps and uncontrollable current rise times.
-
Short power-on time, high thermal efficiency, beautiful welding shape
The intermediate frequency inverter spot welder has a flat output welding current, which ensures the high-efficiency and continuous supply of welding heat. And the power-on time is short, reaching the ms level, which makes the welding heat-affected zone small, and the solder joints are formed beautifully.
-
High control precision
Due to the high working frequency (usually 1-4KHz) of the intermediate frequency spot welding machine, the feedback control accuracy is 20-80 times that of the general AC spot welding machine and the secondary rectification spot welding machine, and the corresponding output control accuracy is also very high.
-
Energy saving
energy saving. Due to high thermal efficiency, small welding transformer and small iron loss, the inverter welding machine can save more than 30% energy than AC spot welding machine and secondary rectification spot welding machine when welding the same workpiece.
-
Inverter spot welding machine is suitable for grid power supply balance, without power compensation equipment
It is used for spot welding and nut projection welding of high-strength steel and hot formed steel in automobile manufacturing industry, spot welding and multi-point projection welding of ordinary low-carbon steel plate, stainless steel plate, galvanized plate, aluminum plate and wire, resistance brazing and spot welding of copper wire in high and low voltage electrical industry, silver spot welding, copper plate brazing, composite silver spot welding, etc.
Welding Samples
Welding Samples
TO46 package
Terminal wire
pin wire
Motor rotor pin
Thermostat stainless steel
Copper tin-plated nickel
Four-point line
New energy IGBT pin wire
enameled wire terminal
bridge terminal connection line
automatic braided tape
Carbon brush copper sheet copper wire
Iron shell diode cap
Motor terminal connection wire
Diode bump
Welder Details
Welder Details
Welding Parameters
Welding Parameters
|
Model |
ADB-5 |
ADB-10 |
ADB-75T |
ADB100T
|
ADB-100 |
ADB-130 |
ADB-130Z |
ADB-180 |
ADB-260 |
ADB-360 |
ADB-460 |
ADB-690 |
ADB-920 |
|
|
Rated Capacity |
KVA |
5 |
10 |
75 |
100 |
100 |
130 |
130 |
180 |
260 |
360 |
460 |
690 |
920 |
|
Power Supply |
ø/V/HZ |
1/220V/50Hz |
3/380V/50Hz |
|||||||||||
|
Primary Cable |
mm2 |
2×10 |
2×10 |
3×16 |
3×16 |
3×16 |
3×16 |
3×16 |
3×25 |
3×25 |
3×35 |
3×50 |
3×75 |
3×90 |
|
Max Primary Current |
KA |
2 |
4 |
18 |
28 |
28 |
37 |
37 |
48 |
60 |
70 |
80 |
100 |
120 |
|
Rated Duty Cycle |
% |
5 |
5 |
20 |
20 |
20 |
20 |
20 |
20 |
20 |
20 |
20 |
20 |
20 |
|
Welding Cylinder Size |
Ø*L |
Ø25*30 |
Ø32*30 |
Ø50*40 |
Ø80*50 |
Ø100*60 |
Ø125*100 |
Ø160*100 |
Ø160*100 |
Ø160*100 |
Ø200*100 |
Ø250*150 |
Ø250*150*2 |
Ø250*150*2 |
|
Max Working Pressure（0.5MP） |
N |
240 |
400 |
980 |
2500 |
3900 |
6000 |
10000 |
10000 |
10000 |
15000 |
24000 |
47000 |
47000 |
|
Compressed Air Consumption |
Mpa |
0.6-0.7 |
0.6-0.7 |
0.6-0.7 |
0.6-0.7 |
0.6-0.7 |
0.6-0.7 |
0.6-0.7 |
0.6-0.7 |
0.6-0.7 |
0.6-0.7 |
0.6-0.7 |
0.6-0.7 |
0.6-0.7 |
|
Cooling Water Consumption |
L/Min |
- |
- |
6 |
6 |
8 |
12 |
12 |
12 |
12 |
15 |
20 |
24 |
30 |
|
Compressed Air Consumption |
L/Min |
1.23 |
1.43 |
1.43 |
2.0
|
2.28 |
5.84 |
5.84 |
5.84 |
5.84 |
9.24 |
9.24 |
26 |
26 |
Custom Process
Custom Process
Successful Cases
Successful Cases
After-sales System
After-sales System
-
20+Years
service team
Accurate and professional -
24hx7
service online
No worry after sales after-sales -
Free
Supply
technical training freely.
Partner
Partner
Welder FAQ
Welder FAQ
-
Q: Are you a manufacturer or trading company?
A: We are a manufacturer of welding equipment for more than 20 years.
-
Q: Can you export machines by your factory.
A: Yes, we can
-
Q: Where are your factory?
A: Xiangcheng District, Suzhou City, Jiangsu Province, China
-
Q: What do we need to do if the machine fails.
A: In the guarantee time(1 year), we will send the spare parts to you for free. And provide the technical consultant for any time.
-
Q: Can I make my own design and logo on the product?
A: Yes, we do OEM.Welcome global partners.
-
Q: Can you provide customized machines?
A: Yes. We can provide OEM services. Better to discuss & confirm with us.