Automobile chassis tower intermediate frequency nut automatic welding machine
Send email to us
Product Introduction
Product Introduction
-
High welding strength, meeting the requirements of Volkswagen
The ADB-250 medium frequency inverter DC spot projection welding machine we choose has full wave rectification, DC output, high peak value and fast climbing. It is one of the most advanced power sources at present. , to ensure the welding strength, and the thrust test exceeds 6800N, which meets the requirements of Volkswagen;
-
The welding appearance is beautiful, ensuring that there is no extrusion after the screw teeth are welded
Through 3D simulation to match the positioning pin, the nut hole is fully sealed, and then the blowing function is added to the lower electrode, and the compressed air is filled inside the nut during welding, and a small amount of metal extrusion is burned in a very short time to ensure thread welding. No extrusion after;
-
High welding efficiency
Through 3D simulation, the two sets of fixtures are integrated into a set of composite fixtures. When changing products, the positioning method can be changed through the pins, without the need to replace fixtures, greatly reducing downtime;
-
Realize automatic welding, high efficiency and avoid work injuries
Add a nut conveyor, change the manual nut placement to vibrating plate conveyance for automatic feeding, and shoot the nut gun directly to the work station to avoid manual intervention and crush fingers to achieve a safe effect;
Welding Samples
Welding Samples
Central channel nut washer projection welding
A-pillar nut projection welding
Threshold nut projection welding site
Door sill nut projection welding
Low carbon steel square nut projection welding
Stainless Steel Hex Nut Projection Welding
Projection welding of thermoformed steel bolts
Projection welding of high strength steel bolts
Galvanized sheet hex nut projection welding
Projection welding of high strength steel bolts
Projection welding of thermoformed steel square nuts
Round Nut Ring Projection Welding
Projection welding of nuts under the chassis
A-pillar nut projection welding
Projection welding of automobile chassis tower nuts
B-pillar nut projection welding
Welder Details
Welder Details
Welding Parameters
Welding Parameters
| Low voltage capacitance | Medium voltage capacitance | ||||||||
| Model | ADR-500 | ADR-1500 | ADR-3000 | ADR-5000 | ADR-10000 | ADR-15000 | ADR-20000 | ADR-30000 | ADR-40000 |
| Store energy | 500 | 1500 | 3000 | 5000 | 10000 | 15000 | 20000 | 30000 | 40000 |
| W.S | |||||||||
| Input power | 2 | 3 | 5 | 10 | 20 | 30 | 30 | 60 | 100 |
| KVA | |||||||||
| Power Supply | 1/220/50 | 1/380/50 | 3/380/50 | ||||||
| φ/V/Hz | |||||||||
| Max Primary current | 9 | 10 | 13 | 26 | 52 | 80 | 80 | 160 | 260 |
| A | |||||||||
| Primary Cable | 2.5㎡ | 4㎡ | 6㎡ | 10㎡ | 16㎡ | 25㎡ | 25㎡ | 35㎡ | 50㎡ |
| mm² | |||||||||
| Max short-circuit current | 14 | 20 | 28 | 40 | 80 | 100 | 140 | 170 | 180 |
| KA | |||||||||
| Rated Duty Cycle | 50 | ||||||||
| % | |||||||||
| Welding Cylinder Size | 50*50 | 80*50 | 125*80 | 125*80 | 160*100 | 200*150 | 250*150 | 2*250*150 | 2*250*150 |
| Ø*L | |||||||||
| Max Working Pressure | 1000 | 3000 | 7300 | 7300 | 12000 | 18000 | 29000 | 57000 | 57000 |
| N | |||||||||
| Cooling Water Consumption | - | - | - | 8 | 8 | 10 | 10 | 10 | 10 |
| L/Min | |||||||||
|
Model |
ADB-5 |
ADB-10 |
ADB-75T |
ADB100T
|
ADB-100 |
ADB-130 |
ADB-130Z |
ADB-180 |
ADB-260 |
ADB-360 |
ADB-460 |
ADB-690 |
ADB-920 |
|
|
Rated Capacity |
KVA |
5 |
10 |
75 |
100 |
100 |
130 |
130 |
180 |
260 |
360 |
460 |
690 |
920 |
|
Power Supply |
ø/V/HZ |
1/220V/50Hz |
3/380V/50Hz |
|||||||||||
|
Primary Cable |
mm2 |
2×10 |
2×10 |
3×16 |
3×16 |
3×16 |
3×16 |
3×16 |
3×25 |
3×25 |
3×35 |
3×50 |
3×75 |
3×90 |
|
Max Primary Current |
KA |
2 |
4 |
18 |
28 |
28 |
37 |
37 |
48 |
60 |
70 |
80 |
100 |
120 |
|
Rated Duty Cycle |
% |
5 |
5 |
20 |
20 |
20 |
20 |
20 |
20 |
20 |
20 |
20 |
20 |
20 |
|
Welding Cylinder Size |
Ø*L |
Ø25*30 |
Ø32*30 |
Ø50*40 |
Ø80*50 |
Ø100*60 |
Ø125*100 |
Ø160*100 |
Ø160*100 |
Ø160*100 |
Ø200*100 |
Ø250*150 |
Ø250*150*2 |
Ø250*150*2 |
|
Max Working Pressure（0.5MP） |
N |
240 |
400 |
980 |
2500 |
3900 |
6000 |
10000 |
10000 |
10000 |
15000 |
24000 |
47000 |
47000 |
|
Compressed Air Consumption |
Mpa |
0.6-0.7 |
0.6-0.7 |
0.6-0.7 |
0.6-0.7 |
0.6-0.7 |
0.6-0.7 |
0.6-0.7 |
0.6-0.7 |
0.6-0.7 |
0.6-0.7 |
0.6-0.7 |
0.6-0.7 |
0.6-0.7 |
|
Cooling Water Consumption |
L/Min |
- |
- |
6 |
6 |
8 |
12 |
12 |
12 |
12 |
15 |
20 |
24 |
30 |
|
Compressed Air Consumption |
L/Min |
1.23 |
1.43 |
1.43 |
2.0
|
2.28 |
5.84 |
5.84 |
5.84 |
5.84 |
9.24 |
9.24 |
26 |
26 |
Custom Process
Custom Process
Successful Cases
Successful Cases
After-sales System
After-sales System
-
20+Years
service team
Accurate and professional -
24hx7
service online
No worry after sales after-sales -
Free
Supply
technical training freely.
Partner
Partner
Welder FAQ
Welder FAQ
-
Q: Are you a manufacturer or trading company?
A: We are a manufacturer of welding equipment for more than 20 years.
-
Q: Can you export machines by your factory.
A: Yes, we can
-
Q: Where are your factory?
A: Xiangcheng District, Suzhou City, Jiangsu Province, China
-
Q: What do we need to do if the machine fails.
A: In the guarantee time(1 year), we will send the spare parts to you for free. And provide the technical consultant for any time.
-
Q: Can I make my own design and logo on the product?
A: Yes, we do OEM.Welcome global partners.
-
Q: Can you provide customized machines?
A: Yes. We can provide OEM services. Better to discuss & confirm with us.