Automobile Seat Slide Rail Automatic Production Line
Send email to us
Product Introduction
Product Introduction
-
High yield
The welding power supply adopts intermediate frequency inverter power supply, which has short discharge time, fast climbing speed, and DC output. Because the double-headed single power supply realizes simultaneous downward voltage and successive discharge, it ensures the flatness and fastness of the product after welding, ensures the welding quality, and greatly improves production. Efficiency, the yield rate is over 99.99%;
-
To solve the problem of workpiece loading, the manual only needs to put the material on the track assembly line
For the guide rail pads, we use the manipulator to take the material to the welding jig after vibrating the material, and manually place the guide rail on the assembly line. After the position is identified by the CCD, the manipulator automatically grabs the workpiece and accurately places it on the jig. The manual labor intensity is reduced, loading and unloading can be completed by one worker
-
The equipment is stable
The equipment adopts all imported configurations of core components, and the welding power supply of the equipment adopts the doctor brand with Advantech industrial computer and the control system independently developed by our company. The network bus control and fault self-diagnosis ensure the reliability and stability of the equipment, and the whole welding process can be traced. , and can be docked with ERP system;
-
Solve the rare problem of taking out the product after welding.
Our station adopts an automatic stripping structure. After the welding is completed, the workpiece will automatically fall to the assembly line. The manual only needs to take out the welded workpiece on the track, which solves the problem of difficult removal of the guide rail after welding;
-
Ensure welding quality, improve production efficiency, and have strong equipment compatibility.
The equipment is highly intelligent. It adopts the overall workstation method of four-station turntable and visual coordination with the manipulator. The whole process of automatic loading and unloading is automatic. Products of different specifications can be produced on one workstation. Only the tooling needs to be replaced, and the tooling replacement time is 13 minutes. Yes, and can automatically identify whether the pads are placed in place, whether the guide rails are placed in place, whether the welding quality is qualified, and all parameters can be exported, and the error detection equipment can automatically alarm and connect with the waste system for comparison to ensure that no waste will flow out. And the production capacity has been increased from the original 2,000 pieces per shift to the current 9,500 pieces per shift;
-
Pipeline beat
Through the optimization of each workpiece, our engineers have a beat of 10S/pc5.
Welding Samples
Welding Samples
Welder Details
Welder Details
Welding Parameters
Welding Parameters
| Model | MUNS-80 | MUNS-100 | MUNS-150 | MUNS-200 | MUNS-300 | MUNS-500 | MUNS-200 | |
| Rated Power(KVA) | 80 | 100 | 150 | 200 | 300 | 400 | 600 | |
| Power Supply(φ/V/Hz) | 1/380/50 | 1/380/50 | 1/380/50 | 1/380/50 | 1/380/50 | 1/380/50 | 1/380/50 | |
| Rated Load Duration (%) | 50 | 50 | 50 | 50 | 50 | 50 | 50 | |
| Maximum Welding Capacity(mm2) | Open Loop | 100 | 150 | 700 | 900 | 1500 | 3000 | 4000 |
| Closed Loop | 70 | 100 | 500 | 600 | 1200 | 2500 | 3500 | |
Custom Process
Custom Process
Successful Cases
Successful Cases
After-sales System
After-sales System
-
20+Years
service team
Accurate and professional -
24hx7
service online
No worry after sales after-sales -
Free
Supply
technical training freely.
Partner
Partner
Welder FAQ
Welder FAQ
-
Q: Are you a manufacturer or trading company?
A: We are a manufacturer of welding equipment for more than 20 years.
-
Q: Can you export machines by your factory.
A: Yes, we can
-
Q: Where are your factory?
A: Xiangcheng District, Suzhou City, Jiangsu Province, China
-
Q: What do we need to do if the machine fails.
A: In the guarantee time(1 year), we will send the spare parts to you for free. And provide the technical consultant for any time.
-
Q: Can I make my own design and logo on the product?
A: Yes, we do OEM.Welcome global partners.
-
Q: Can you provide customized machines?
A: Yes. We can provide OEM services. Better to discuss & confirm with us.