banner ea leqephe

Automobile Seat Slide Rail Automatic Production Line

Tlhaloso e Khutšoanyane:

Automobile seat slide rail pad automatic welding line

Mohala oa othomathike oa li-cushion tsa litulo tsa koloi ke mohala oa othomathike oa ho tjheseletsa litšepe tsa li-slide tsa setulo sa koloi le li-cushion blocks tse hlophisitsoeng ke Suzhou Anjia ho latela litlhoko tsa bareki.E na le ts'ebetso ea li-welding tse potlakileng, lihlahisoa tse ngata le lisebelisoa tse phahameng tsa thepa.Ho lokile, e ka rarolla mathata a ho kenya le ho theolla ka thata, le ho hira li-welder tse mpe.Ho feta moo, k'hamphani ea rona e boetse e hlophisitse setulo sa koloi sa slide rail bracket automatic hot riveting, bolt le screw automatic welding line, joalo-joalo bakeng sa bareki.

Automobile Seat Slide Rail Automatic Production Line

Video ea Welding

Video ea Welding

Kenyelletso ea Sehlahisoa

Kenyelletso ea Sehlahisoa

  • 1. Kotulo e phahameng

    Motlakase oa welding o amohela phepelo ea motlakase ea maqhubu a mahareng, e nang le nako e khuts'oane ea ho tsoa, ​​lebelo la ho hloa ka potlako, le tlhahiso ea DC.

  • Hobane motlakase o nang le lihlooho tse peli o lemoha matla a ho theoha ka nako e le 'ngoe le ho tsoa ka ho latellana, o netefatsa ho bata le ho potlaka ha sehlahisoa ka mor'a ho tjheseletsa, ho netefatsa boleng ba tjheseletsa, le ho ntlafatsa haholo tlhahiso.

  • Ka katleho, sekhahla sa lihlahisoa se feta 99.99%;

  • 2. Ho rarolla bothata ba ho roala li-workpiece, bukana e hloka feela ho beha boitsebiso molaong oa kopano ea pina

    Bakeng sa lipalangoang tsa seporo, re sebelisa manipulator ho isa thepa ho jig ea welding ka mor'a ho sisinya thepa, 'me ka letsoho re behe seporo sa tataiso moleng oa kopano.

  • Ka mor'a hore boemo bo khethoe ke CCD, manipulator ka boeona o tšoara mosebetsi oa matsoho ebe o o beha ka nepo ho jig.

  • Matla a mosebetsi oa matsoho a fokotsehile, ho palamisa le ho laolla ho ka phethoa ke mosebeletsi a le mong

  • 3. Thepa e tsitsitse

    Thepa e amohela litlhophiso tsohle tse tsoang kantle ho naha tsa likarolo tsa mantlha, 'me phepelo ea matla a ho cheselletsa thepa e amohela mofuta oa ngaka ka komporo ea indasteri ea Advantech le sistimi ea taolo e ikemetseng e ntlafalitsoeng ke k'hamphani ea rona.

  • Taolo ea libese ea marang-rang le ho itlhahloba ka phoso ho netefatsa ho ts'epahala le botsitso ba lisebelisoa, mme ts'ebetso eohle ea welding e ka lateloa., mme e ka emisoa ka sistimi ea ERP;

  • 4. Rarolla bothata bo sa tloaelehang ba ho ntša sehlahisoa ka mor'a ho cheselletsa.

    Seteishene sa rona se amohela sebopeho sa ho hlobola ka boiketsetso.Ka mor'a hore tjheseletso e phethoe, workpiece e tla oela ka tsela e iketsang moleng oa kopano.

  • Bukana e hloka feela ho ntša workpiece e cheselitsoeng ka pina, e rarollang bothata ba ho tlosoa ho thata ha seporo sa tataiso ka mor'a ho tjheseletsa;

  • 5. Netefatsa boleng ba tjheseletsa, ho ntlafatsa katleho ea tlhahiso, le ho ba le tšebelisano e matla ea lisebelisoa.

    Thepa e bohlale haholo.

  • E sebelisa mokhoa o akaretsang oa ho sebetsa oa li-turntable tsa liteishene tse 'ne le khokahano ea pono le manipulator.

  • Ts'ebetso eohle ea ho kenya le ho laolla ka boiketsetso e ea iketsa.Lihlahisoa tsa litlhaloso tse fapaneng li ka hlahisoa setsing se le seng sa mosebetsi.

  • Ke lisebelisoa feela tse lokelang ho nkeloa sebaka, 'me nako ea ho fetola lisebelisoa ke metsotso e 13.

  • E, 'me e ka tseba ka tsela e iketsang hore na li-pads li behiloe sebakeng sa heno, hore na li-rails tsa tataiso li behiloe sebakeng sa tsona, hore na boleng ba tjheseletsa bo tšoaneleha,' me litekanyetso tsohle li ka romeloa linaheng tse ling, 'me lisebelisoa tsa ho lemoha phoso li ka lla le ho hokahanya le litšila. mokhoa oa ho bapisa ho netefatsa hore ha ho na litšila tse tla tsoa.

  • 'Me matla a tlhahiso a eketsehile ho tloha ho likotoana tsa pele tsa 2,000 ho ea ho likotoana tsa hona joale tsa 9,500 ka phetoho;

  • 6. Pipeline otla

    Ka ho ntlafatsa mosebetsi o mong le o mong, baenjiniere ba rona ba na le lebelo la 10S/pc5.

Mehlala ea Welding

Mehlala ea Welding

single_jiantou

Lintlha tsa Welder

Lintlha tsa Welder

产品说明-160-中频点焊机--1060

Mekhahlelo ea Welding

Mekhahlelo ea Welding

Linyeoe tse Atlehileng

Linyeoe tse Atlehileng

nyeoe (1)
nyeoe (2)
nyeoe (3)
nyeoe (4)

Kamora ho rekisa Sistimi

Kamora ho rekisa Sistimi

  • 20+Lilemo

    sehlopha sa tšebeletso
    E nepahetseng ebile e le setsebi

  • 24hx7

    tšebeletso inthaneteng
    U se ke ua tšoenyeha ka mor'a ho rekisa ka mor'a thekiso

  • Mahala

    Phepelo
    koetliso ea tekheniki ka bolokolohi.

single_system_1 single_system_2 single_system_3

Molekane

Molekane

molekane (1) molekane (2) molekane (3) molekane (4) molekane (5) molekane (6) molekane (7) molekane (8) molekane (9) molekane (10) molekane (11) molekane (12) molekane (13) molekane (14) molekane (15) molekane (16) molekane (17) molekane (18) molekane (19) molekane (20)

Welder FAQ

Welder FAQ

  • P: Na u moetsi kapa k'hamphani ea khoebo?

    A: Re moetsi oa lisebelisoa tsa tjheseletsa ka lilemo tse fetang 20.

  • P: A na u ka romela mechine ka feme ea hau.

    A: E, re ka khona

  • P: Feme ea hau e hokae?

    A: Setereke sa Xiangcheng, Motse oa Suzhou, Profinseng ea Jiangsu, Chaena

  • P: Re lokela ho etsa eng haeba mochine o hlōleha.

    A: Ka nako ea tiisetso (selemo se le seng), re tla u romella lisebelisoa tsa mahala mahala.Mme o fane ka moeletsi wa tekheniki nako efe kapa efe.

  • P: Na nka iketsetsa moralo le logo ea ka sehlahisoa?

    A: E, re etsa OEM. Welcome global partners.

  • P: A na u ka fana ka mechine e hlophisitsoeng?

    A: Ho joalo.Re ka fana ka litšebeletso tsa OEM.Ho molemo ho buisana le ho netefatsa le rona.