Dalilan spatter a lokacin inverter tabo waldi da kuma yadda za a rage shi

Inverter tabo waldi, kuma aka sani da matsakaici mita tabo waldi, ana amfani da ko'ina a masana'antu masana'antu domin ta high dace da kuma high daidaici.Koyaya, spatter matsala ce ta gama gari wacce ke faruwa yayin aikin walda.Spatter yana nufin tarwatsa ƙananan ɓangarorin ƙarfe na zube yayin aikin walda.Wadannan barbashi na iya haifar da lalacewa ga yankin da ke kewaye kuma suna shafar ingancin walda.A cikin wannan labarin, za mu tattauna dalilan spatter a lokacin inverter tabo waldi da kuma yadda za a rage shi.

Akwai dalilai da yawa na spatter lokacin walda tabo inverter:
1.Welding current yana da yawa: Idan an saita ƙarfin walda da yawa, zai iya sa ƙarfe ya yi tururi kuma ya samar da adadi mai yawa na spatter.
2.Electrode kwana: The kwana tsakanin lantarki da workpiece kuma iya rinjayar spatter.Idan kusurwa ya yi girma sosai, zai iya haifar da zafi mai yawa a cikin ƙananan yanki, wanda zai haifar da spatter.
3.Surface gurbatawa: Idan surface na workpiece ne gurbata da man fetur, tsatsa, ko wasu ƙazanta, zai iya haifar da spatter a lokacin waldi.
4.Welding gudun: Idan gudun walda ya yi sauri, zai iya haifar da rashin isasshen narkewa na karfe kuma ya kai ga spatter.
5.Electrode lalacewa: A tsawon lokaci, da lantarki za su zama sawa kuma ba zai iya yadda ya kamata canja wurin halin yanzu zuwa workpiece, haddasa spatter.

Don rage spatter lokacin walda tabo inverter, ana iya ɗaukar matakai da yawa:
1.Adjust walda halin yanzu: Tabbatar cewa walda halin yanzu an saita zuwa matakin da ya dace don hana wuce kima vaporization na karfe.
2.Check electrode kwana: Bincika da daidaita kusurwa tsakanin lantarki da workpiece don hana wuce kima zafi taro.
3. Tsaftace saman aikin: Tabbatar cewa saman aikin yana da tsabta kuma ba shi da mai, tsatsa, ko wasu ƙazanta.
4.Adaidaita saurin walda: Daidaita saurin waldawa zuwa matakin da ya dace don tabbatar da isasshen narkewar ƙarfe.
5.Maye gurbin lantarki: Sauya wutar lantarki lokacin da ya zama sawa don tabbatar da canja wurin da ya dace da kuma rage spatter.

Ta hanyar ɗaukar waɗannan matakan, yana yiwuwa a rage spatter yayin walda tabo ta inverter kuma tabbatar da ingantaccen walda.